Samsung Galaxy S3 Upgrading/Flashing

Samsung Galaxy S3 Upgrading/Flashing

Step-1: Download Xxemg6 Android 4.1.2 Jelly Bean official upgrade for Samsung Galaxy S3 to workstation 

Step-2: Extract downloaded firmware compress utilizing winrar/7zip/winzip or other concentrating device to get .tar.md5 index 

Step-3: Download Odin v3.07. Separate Odin hurdle to get Odin3 v3.07.exe  

Step-4: Switch off Galaxy S3 and hold up five to six seconds for vibration to affirm finish power off 

Step-5: Boot mechanism into Download mode by pressing and holding Volume Down, Home and Power catches until development Android robot and a triangle shows up onscreen. Notwithstanding press Volume Up to press on to Download mode  

Step-6: Run Odin3 v3.07.exe as Administrator [to do along these lines, right-click on Odin.exe and click Run as Administrator from connection menu]  

Step-7: Connect Galaxy S3 to workstation utilizing USB link, while mechanism is in Download mode. Hold up until Odin locates the unit. The point when the telephone is associated, an Added message will show up in Odin. Additionally, the ID: COM enclose Odin will turn blue with the COM port number, demonstrating auspicious association 

Note: If Added message does not show up, then attempt USB port found at back of workstation. In the event that Odin still neglects to recognise unit, then re-instate USB driver 

Step-8: Select these indexes, removed from I9300xxemg6 envelope, to fix on telephone 

a) Click the PDA catch and select .tar.md5 index 

b) Click the Phone catch and select MODEM in its name 

c) Click the CSC catch and select CSC in its name  

d) Click the PIT catch and select .pit index 

Note: Ignore last three steps if such indexes don't exist. 

 Step-9: Configure Odin settings. Guarantee Auto Reboot and F.reset Time checkboxes are chosen in Odin window yet uncheck Re-Partition alternative; select it just when a .pit record is utilized 

Step-10: Double weigh and click Start in Odin. The establishment process may as well start now and will take a couple of minutes to finish 

Step-11: When the establishment process is finished, the telephone will immediately reboot. The solid establishment will be demonstrated by a PASS message with green foundation in a container at the compelling left corner of Odin's screen. Unplug apparatus from machine by separating from USB link 

The Xxemg6 Android 4.1.2 Jelly Bean official upgrade may as well now be fixed and running on your Galaxy S3. Go to Settings > About telephone > Android & Baseband Version, to check new programming form of the apparatus. 

The most effective method to Fix Bootloop Issue 

Provided that the Galaxy S3 gets stayed at booting liveliness or Samsung logo (after step-11), then put apparatus in Recovery Mode by pressing and holding Home, Power and Volume Up binds together. In recuperation, perform the information wiping assignment by selecting Wipe Data/factory Reset. At that point select Wipe Cache Partition and once movement is complet, reboot telephone by selecting Reboot System Now. In Recovery Mode, use Volume keys to span between alternatives and Power to select wanted choice. It ought to be noted that performing a wiping assignment will eradicate telephone's inward memory.